banner
Aircondition.Com is the fault of our sponsors!
[ Follow Ups ] [ Post Followup ] [ Bulletin Board ] [ Home ] [ Topics ] [ Technical Pages ]

We Recommend...   Cool Profits - MVAC Industry News   AC Source - Tools, Equipment & Parts
 

Subject:    Re: Expansion valve removal
Date:    July 12, 2005 at 00:05:34
Posted by:    Dave Carroll via: or 67.177.3.12
In Reply to:    The message posted by Chick on June 27, 2005 at 17:13:16:

I'm removing the expansion valve on a 97 caravan and can't find the two torque head screws. Compressor failed and I am going to flush the system, but need to remove the expansion valve first. I removed the nut, but nothing is coming apart and I don't see any torque head screws. Do I just need to pull/pry on the part just behind the nut a bit harder to remove it or are the torque screws holding it in place? Any help would be appreciated.

Follow Ups:




Subject: Archived -



  Most Popular A/C Knowledge Base Questions

  1. What is Black Death?
  2. Troubleshooting with Gauges FAQ
  3. Location and Replacement of Cabin Air Filters
  4. How Refrigerant Flows Through the System
  5. A/C Flush FAQ
  6. Air Powered A/C Vacuum Pumps
  7. What Does it Mean to Flush the A/C System?
  8. Condensate Drain on Jeep Grand Cherokee
  9. The First Step to Successful Refrigerant Leak Detection
  10. Which Electronic Refrigerant Leak Detector to Buy?




[ Home Page ] [ Archives ] [ Search ] [ Knowledge Base ]